Wood VENEERING

Here we go with the second technical articles, translated from this post. Today we are talking about the process off veneering, that is used to produce furniture that is resistant, nice and also less expensive that the one in massif wood. How does it can be possible?

First of all, you should have been read the article about wood SLICING, that will provide you a good explanation about the way we can obtain a sheet of wood.
Then, we must clear up the concept of veneering: this words refers only to the covering made by wood sheets (called veneer) and not to all kind of covering. Indeed, wood can be covered also by melaminic resins, but we'll talk about it another time.

Questions? Please feel free to pose questions on the comment area, under this post!
Now we can describe what happens to the sheet of wood. Once it is sliced from the log, it is dried up and sometimes also ironed, as your mother (or wife) does with your shirt, as there will be no unaesthetic pleats once you wear it.
These sheets undertake a docking and trimming, that means parallel and perpendicular cutting to make the edges uniform.



Now the veneer is ready to be joined one to another, to create bigger panels.
This laid-up veneer can be done in different ways, with glue on the edges or adding paper on the back of it. This last process is used to compose marquetry and it is also very useful when the veneer is applied on curved surfaces: in this way the wood is less likely to crack.
Anyhow, precision is essential. The pattern depends on the different lying up of sheets. Here you can see come examples.

These sheets are glued (with special kind of glue) on less-precious wood panels.

What about the result?
Stable and durable furniture, that resist better to woodworm attacks and are homogeneous when produced in series. Moreover, with an infinite choice of the patterns, that is limited only by our imagination (and technique progress). Some project can be realized only by using veneer, because the climate changes (hot and cold, rain and sun) cause a contraction and expansion of solid wood and this can compromise the stability of the furniture.

But, most important, wood veneering is ecological! Furniture made by wood veneer uses less wood that same pieces made by solid wood. Using wood requires 70% less energy than other materials.
Being eco-friendly means a greater possibility of recyclability and renewability, for a conscious and attentive use of wood resources.



At the end, some sort of curiosity: wood veneer was used since Renaissance. Obviously, they had no machinery like the ones we use today and, of course they sliced wood in thicker sheets.
This can be used to recognize the age of some furniture and avoid buying fakes!